Chapter 4 Environment Creation
4.1 New Installation
ETERNUS VSS Hardware Provider 2.1 User’s Guide
Copyright 2012 FUJITSU LIMITED P3AM-4582-03ENZ0
37
5The following window to register a Shadow Copy destination in the target disk pool
management file appears.
If multiple mount points or drive letters are allocated to one disk, one of them is displayed.
Select the disk that is to be a Shadow Copy destination from [Disk list] (multiple selections can
be made), and click the [--->] button and then [OK] button to register the disks in [Target disk list]
and [Used target disk list] in the target disk pool management file.
If the ETERNUS Disk storage system setup has not completed yet, click the [CANCEL] button.
After the ETERNUS Disk storage system setup has completed, execute the Target Disk Pool
Registration/Deletion function to register a Shadow Copy destination.
•For a Server Core environment
The window to register a Shadow Copy destination in the target disk pool management
file does not appear when the installation is complete.
After installation is complete, register a Shadow Copy destination in the target disk pool
management file using the "Target Disk Pool Registration/Deletion Command".
For details, refer to "8.9 Target Disk Pool Registration/Deletion Command (stxvsetdiskpool)"
(page 68).
6Click the [Finish] button on the "InstallShield Wizard Completed" screen to finish the
installation.
End of procedure
For a copy set operation, do not register a Shadow Copy destination. Click the [Cancel] but-
ton.