Chapter 9 Messages
9.2 Command Messages
ETERNUS VSS Hardware Provider 2.1 User’s Guide
Copyright 2012 FUJITSU LIMITED P3AM-4582-03ENZ0
123
■STXV3013 ERROR Multiple sessions exist.
[Meaning]
Multiple sessions exist. The process is canceled.
[Action]
Specify the -t option for the Backup Control Command, and try again.
■STXV3014 ERROR Invalid combination of options.
[Meaning]
The combination of options is invalid. The process is canceled.
[Action]
Check the combination of options, and try again.
■STXV3017 ERROR Failed to operate the device. "BoxID", "OLU number"
[Meaning]
Failed to operate the device. The process is canceled.
[Action]
Refer to "10.2 How to Obtain Error Information" (page 131), and prepare the required information
before contacting a Fujitsu field engineer (FE).
■STXV3018 ERROR Failed to delete the session. "BoxID", "OLU number", "error code"
[Meaning]
Failed to delete the session. The process is canceled.
[Action]
Refer to "10.2 How to Obtain Error Information" (page 131), and prepare the required information
before contacting a Fujitsu field engineer (FE).
■STXV3019 ERROR -t option cannot be specified since the copy type is SnapOPC+.
[Meaning]
The -t option cannot be specified since the copy type is SnapOPC+. The process is canceled.
[Action]
Try again without specifying the -t option.
■STXV3020 INFO Copy session was stopped. Source-BoxID = "Box ID", Source-OLU
= "OLU number", Target-BoxID = "Box ID", Target-OLU = "OLU number"
[Meaning]
The copy session was stopped.