Fujitsu 2.1 - page 57

Chapter 8 Commands
8.3 Backup Control Command (stxvcopy)
ETERNUS VSS Hardware Provider 2.1 User’s Guide
Copyright 2012 FUJITSU LIMITED P3AM-4582-03ENZ0
57
■Execution example
●When the OLU number is not specified
●When the OLU number is specified
C:\>"C:\Program Files\ETERNUS VSS Hardware Provider\bin\stxvcopy" 1 stop
STXV0317 INFO Copy session was stopped. Source-Disk = 1 Source-BoxID =
00E4000M3#####E430S20AU###MP4020738001## Source-OLU = 0x000b
Target-BoxID = 00E4000M3#####E430S20AU###MP4020738001## Target-OLU = 0x001f
stxvcopy successfully completed.
C:\>
C:\>"C:\Program Files\ETERNUS VSS Hardware Provider\bin\stxvcopy" 1
stop -t 0x001f
STXV0317 INFO Copy session was stopped. Source-Disk = 1 Source-BoxID =
00E4000M3#####E430S20AU###MP4020738001## Source-OLU = 0x000b
Target-BoxID = 00E4000M3#####E430S20AU###MP4020738001## Target-OLU = 0x001f
stxvcopy successfully completed.
C:\>
Only a copy session of the specified source disk can be stopped.
•When there are multiple QuickOPC sessions in the specified source disk, use the -t option to
specify the OLU number of the Shadow Copy destination for the target copy session to be
stopped.
Only the specified copy session is stopped.
•When there are multiple copy sessions in the specified source disk for the SnapOPC+ stop
process, only the first generation of the SnapOPC+ sessions are stopped. Confirm that the copy
sessions to be stopped are the first generation of the SnapOPC+ sessions and check that no
backup is being performed before executing the SnapOPC+ stop process.
•When this command is executed with the -f option for the QuickOPC stop process, the copy
session is stopped without waiting for the differential copy to be finished.
•If this command is executed without the -f option for the QuickOPC stop process when a
differential copy is running, the copy session is stopped after the differential copy is finished
•If an ETERNUS Disk storage systems hardware error occurs, this command is not executed.