Chapter 9 Messages
9.1 Event Log Messages
ETERNUS VSS Hardware Provider 2.1 User’s Guide
Copyright 2012 FUJITSU LIMITED P3AM-4582-03ENZ0
88
■Event ID: 1012
Type:Error
Messages:STXV1012 ERROR Event handler setting of VSS Hardware Provider Communication
Server service failed. errno = [internal code]
Details:
Event handler setting of ETERNUS VSS Hardware Provider Communication Server service failed.
The process is canceled.
Restart the ETERNUS VSS Hardware Provider Communication Server service.
If the problem still persists, refer to "10.2 How to Obtain Error Information" (page 131), and prepare
the required information before contacting a Fujitsu field engineer (FE).
■Event ID: 1013
Type:Error
Messages:STXV1013 ERROR Obtaining the port number of the "services" file failed. errno =
[internal code]
Details:
Obtaining the port number of the "services" file failed. The process is canceled.
Restart the ETERNUS VSS Hardware Provider Communication Server service.
If the problem still persists, refer to "10.2 How to Obtain Error Information" (page 131), and prepare
the required information before contacting a Fujitsu field engineer (FE).
■Event ID: 1101
Type:Error
Messages:STXV1101 ERROR The thread ended with an error. Thread ID = [thread ID], exitcode =
[end status of the thread]
Details:
The thread ended with an error. The process is canceled.
This message is output when sending a request to the port of ETERNUS VSS Hardware Provider
Communication Server service using a function such as port scan.
Check that there is no communication to the port of the ETERNUS VSS Hardware Provider
Communication Server service via anything other than VSSHP.
If the problem still persists, refer to "10.2 How to Obtain Error Information" (page 131), and prepare
the required information before contacting a Fujitsu field engineer (FE).
■Event ID: 1102
Type:Error
Messages:STXV1102 ERROR The thread ended abnormally. Thread ID = [thread ID], exitcode =
[end status of the thread]
Details:
The thread ended abnormally. The process is canceled.
Refer to "10.2 How to Obtain Error Information" (page 131), and prepare the required information
before contacting a Fujitsu field engineer (FE).