Chapter 9 Messages
9.2 Command Messages
ETERNUS VSS Hardware Provider 2.1 User’s Guide
Copyright 2012 FUJITSU LIMITED P3AM-4582-03ENZ0
95
■STXV0005 ERROR Invalid number of parameters.[Meaning]
The number of parameters specified is invalid. The process is canceled.
[Action]
Correct the number of parameters, and try again.
■STXV0006 ERROR Invalid parameter. Parameter="Parameter"[Meaning]
The specified "Parameter" is invalid. The process is canceled.
[Action]
Correct the parameter, and try again.
■STXV0101 ERROR Invalid number of parameters.[Meaning]
The number of parameters specified is invalid. The process is canceled.
[Action]
Correct the number of parameters, and try again.
■STXV0102 ERROR Invalid parameter. Parameter = "Parameter"[Meaning]
The specified "Parameter" is invalid. The process is canceled.
[Action]
Correct the parameter, and try again.
Check the mount point if it has been specified.
■STXV0103 ERROR Pseudo SnapOPC already started.[Meaning]
Measurement of the amount of updates has already started. The process is canceled.
[Action]
Stop measuring the amount of updates, and try again.
■STXV0104 ERROR Pseudo SnapOPC not started.[Meaning]
Measurement of the amount of updates has not started yet. The process is canceled.
[Action]
Start the measurement of the amount of updates, and try again.