Problem | Possible Cause | Possible Solutions |
|
|
|
|
|
|
The batteries seem to | The power savings fea- | Check the Power Options menu settings and adjust according to |
discharge too quickly. | tures may be disabled. | your operating needs. |
|
|
|
(continued) | The brightness is | Turn down the brightness adjustment. The higher the brightness |
| turned all the way up. | the more power your display uses. |
|
|
|
| The batteries are very | Replace the batteries. |
| old. |
|
|
|
|
| The batteries have been | Replace the batteries. |
| exposed to high temper- |
|
| atures. |
|
|
|
|
| The batteries are too | Restore the notebook to normal operating temperature. Charging |
| hot or too cold. | icon on the Status Indicator panel will flash when battery is out- |
|
| side of operating range. |
|
|
|
Shutdown and Startup Problems |
| |
|
|
|
The Suspend/Resume but- | Suspend/Resume | Enable the button by going to the Control Panel > Power Options |
ton does not work. | button is disabled. | Properties and select the “Choose what the power button does” |
|
| option. |
|
|
|
| There may be applica- | Close all applications and try the button again. |
| tion software conflict. |
|
|
|
|
The system powers up, and | The boot sequence set- | Set the operating source by pressing the [ESC] key while the |
displays power on informa- | tings of the setup utility | Fujitsu logo is on screen or use the [F2] key and enter the setup |
tion, but fails to load the | are not compatible with | utility and adjust the source settings from the Boot menu. See |
operating system. | your configuration. | “BIOS Setup Utility” on page 44. |
|
|
|
| You have a secured | Make sure you have the right password. Enter the setup utility and |
| system requiring a | verify the Security settings and modify them as accordingly. See |
| password to load your | “BIOS Setup Utility” on page 44. |
| operating system. |
|
|
|
|
