Fujitsu Siemens Computers N6470 manual External Video Port, External Video Connection

•

•

•

•

THERE ARE SEVERAL TYPES OF CABLES FOR CONNECTING A DIGITAL ELECTRONIC DEVICE TO THE DIGITAL AUDIO-OUT CONNECTOR, DEPENDING ON THE CONNECTOR TYPE. THE CONNECTOR ON YOUR COMPUTER IS A OPTICAL MINI PLUG (3.5MM DIAMETER MINI PLUG)

THE FREQUENCY OF DIGITAL SOUND OUTPUT FROM THE SPDIF OUTPUT CONNECTOR IS SELECTABLE AS 48.0 KHZ OR 44.1 KHZ. IF A SAMPLING RATE CONVERTER IS NOT INSTALLED IN YOUR DIGITAL ELECTRONIC DEVICE (E.G., MD PLAYER), RECORDING IS NOT POSSIBLE. SEE THE DEVICE USER MANUAL FOR MORE DETAILS.

THE SOUND RECORDED THROUGH CONNECTING A DIGITAL ELECTRONIC DEVICE (E.G., MD PLAYER) TO THE SPDIF OUTPUT CONNECTOR CANNOT BE USED AS DIGITAL OUTPUT. ALL OUTPUT DATA FROM THE SPDIF OUTPUT CONNECTOR HAS COPYRIGHT PROTECTION INFORMATION INCLUDED.

IF YOU PLUG HEADPHONES INTO THE HEADPHONE JACK, YOU WILL DISABLE THE BUILT-IN STEREO SPEAKERS.

External Video Port

PRESSING THE [FN] + [F10] KEYS ALLOWS YOU TO CHANGE YOUR SELECTION OF WHERE TO SEND YOUR DISPLAY VIDEO. EACH TIME YOU PRESS THE KEY COMBINATION, YOU WILL STEP TO THE NEXT CHOICE, STARTING WITH THE BUILT-IN DISPLAY PANEL ONLY, MOVING TO THE EXTERNAL DEVICE ONLY, FINALLY MOVING TO BOTH THE BUILT-IN DISPLAY PANEL AND AN EXTERNAL VIDEO DEVICE.

The external video port allows you to connect an external monitor or LCD projector. In order to connect an external device follow these easy steps:

1 Align the connector with the port opening.

2 Push the connector into the port until it is seated.

3 Tighten the two hold-down screws, located on each end of the connector.

Figure 40. External Video Connection

79 - Device Ports