GE 40, 20, 10, 30 manual 24

g

GE

Rectifier Utility data screen

This screen refers to the AC source supplying the Rectifier.

This screen displays:

•Iout1 = output current Rectifier Bridge.

•Iout2 = output current 2nd Rectifier Bridge (optional 12 pulse Rectifiers only).

•The voltage levels between the three phases (line-to-line).

•The input frequency of the Rectifier.

metering	RECTIFIER		+
alarms	U12=481V	Iout1 =107A	–
	U23=480V	Iout2 = 0A
parameters	U31=482V	f=60.0Hz	ok

Inverter data screen

This screen displays:

•The voltage level of the three phase voltages (line-to-neutral).

•The output frequency of the Inverter.

•The synchronization status of the Inverter with respect to Utility.

metering	INVERTER:	U1=277V	+
alarms	U2= 277V	U3=277V	–
	Frequency = 60.0Hz
parameters	Synchronized		ok

Status Load screen

This screen displays:

•The Load level in kVA (for RPA: only this unit).

•The Load level as a percentage of the nominal rated Load (for RPA: only this unit).

•The source of the power supplied to the Load.

metering		LOAD ON UPS		+
alarms	Load	=	25.20kVA	–
	Percentage =		84%
parameters	LOAD ON INVERTER			ok

Load on phases screen 1

This screen displays for each phase:

•The output phase voltage and current as RMS values (for RPA: total value of Parallel System).

•The output Load as percent (for RPA: respect to the rated power of Parallel System).

metering

alarms parameters

LOAD ON PHASES U1=277V I=30A 84% U2=277V I=26A 73% U3=277V I=27A 76%

+

–

ok

OPM_SGS_USM_10K_40K_0US_V010.doc 24/88 Operating Manual SG Series 10, 20, 30 & 40 kVA