g

GE

8.1.7EPO (Emergency Power Off) Input contact

1

2

3

4

1 2 3 4

SGT5000_100-150_Customer interface EPO_01

JP3

J2

XB

An external Emergency switch (Normally Closed voltage-free contact) can be connected on terminals XB / 1 - 4 or connector J2 / 12 - 25 of the P4 - Interface Customer.

Remove the cable short-circuiting terminals XB 2 - 3) when using this external switch.

Fig. 8.1.7-1 Terminals for connection EPO

To enable this function, remove cable short-circuiting XB / 2 - 3 on the Terminal XB and the Jumper JP3 on P4 – Customer Interface, when the cables have been already connected on XB or J2.

In a parallel system a separate NC (Normally Closed) contact must be connected individually to each unit.

When opened, this contact causes the immediate opening of the Contactors K3, K4, K6, K7 and K8, as well as the shutdown of Rectifier, Inverter and Static-Switch.

Be aware: The reliability of the system depends on this contact!

After closure of the Emergency contact, a reset is necessary to enable the restart of the UPS, by pressing the key “O” (inverter off) on the control panel.

In case of a parallel system press the key “O” (inverter off) on the control panel of each unit connected on parallel bus and having it’s output switch Q1 closed.

OPM_SGS_USM_10K_40K_0US_V010.doc

82/88

Operating Manual SG Series 10, 20, 30 & 40 kVA