g
GE
6.3PARAMETERS
The parameters mode is entered any time the parameters button is pressed.
The LCD will display a series of screens containing the user parameters, accessible without password protection.
The buttons perform the following functions:
metering | Abandon parameters mode and enter metering mode. |
alarms | Abandon parameters mode and enter alarms mode. |
parameters | Scroll forward to the next screen. |
+ | Scroll forward to the next screen. |
– | Select from the current screen the parameter to edit. |
ok | Start the editing for the currently selected parameter. |
During parameters mode there is no means to perform scroll back on the display.
Example of operation within parameters mode:
Purpose: to correct a wrong telephone number previously stored in Tel2.
1 – entering parameters mode (parameters). The first screen is displayed.
2 – scroll to the next screen (+). The second screen is displayed.
3 – scroll to the next screen (+). The third screen is displayed.
4 – move the selection (underscore cursor) to the next parameter in this page
6 – enter Edit mode for the currently selected parameter (ok).
1
2
| metering | DATE AND TIME | + |
| |
| alarms |
| D M Y | – | |
| Date: | 01.10.2002 | |||
| parameters | Time: | 12:45:07 | ok | |
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
metering | PROTOCOL SETUP | + | |
alarms | Modem enabled=N | – | |
Init=BEQV1X3&D0S0=2 | |||
parameters | Alarm= N | Delay=22s | ok |
|
| ||
|
|
|
|
OPM_SGS_USM_10K_40K_0US_V010.doc | 27/88 | Operating Manual SG Series 10, 20, 30 & 40 kVA |