Display Module
Display Module
Screen number | Error code | Potlife state | Active recipe |
|
|
| |
Ratio |
|
| Operation mode; see |
|
|
| |
LCD display |
|
| page 22 for key |
|
|
| |
Potlife timers |
|
| Navigation keys |
|
|
| |
|
|
| Flow rate |
Soft keys |
|
| Enter key |
Navigation keys |
|
|
|
Standby key |
|
| Error Reset |
|
| key | |
Setup key |
| ti16319a |
|
FIG. 10. Display Module |
|
|
|
Display
Shows graphical and text information related to setup and spray operations. The screen backlight is factory set to remain on. The user may set a number of minutes the screen can be inactive before the backlight dims. See Configure 3 (Screen 20), page 44. Press any key to restore.
NOTE: The Display Module and bracket can be removed from the cover of the electrical box and mounted remotely, if preferred.
Keys are used to input numerical data, enter setup screens, navigate within a screen, scroll through screens, and select setup values.
NOTICE
To prevent damage to the soft key buttons, do not press the buttons with sharp objects such as pens, plastic cards, or fingernails.
Key
Function
Setup: Press to enter or exit Setup mode.
Enter: Press to choose a field to update, to make a selection, or to save a selection or value.
Left/Right Arrows: Use to move from screen to screen.
Up/Down Arrows: Use to move among fields on a screen, items on a dropdown menu, or digits in a settable field.
Error Reset: Use to clear alarm so cause can be fixed. Also use to cancel a data entry field.
Standby: Stops the current operation and puts the system into standby.
Soft keys: Press to select the specific screen or operation shown on the display directly above each key.
3A0868G | 21 |
