
Sending Scan Files by Scan to Folder
Sending Scan Files by Scan to Folder
3
Procedure for Sending by Scan to Folder
A scan file is sent after scan settings and destinations are specified.
A Press the {Scanner} key.
ZZZ606S
Note
❒The illustration is an example. The actual appearance may be different.
B Make sure that no previous set- tings remain.
Note
❒If a previous setting remains, press the {Clear Modes} key.
C Make settings for the original, such as orientation and output tray.

Reference
p.75 “Specifying the Orienta- tion and Output Tray of the Original”
D Make the scan settings.

Reference
There are two ways to specify scan settings, as described be- low:
•Configure each setting for scanning. For details, see p.73 “Specifying Scan Set- tings”.
•Recall registered settings. For details, see p.80 “Programs”.
E If the network delivery scanner screen appears, switch to the Scan to Folder screen.
APress [].
BPress [Switch Destination List].
CPress [E-mail].
DPress [Exit].
The
EPress [].
The Scan to Folder screen ap- pears.
F Specify the destination folder.
You can specify the destination folder in the following ways:
•Select it from the destination list.
•Specify its registration number.
34