
1. Getting Started
Control Panel
This illustration shows the control panel when options are installed.
AGH002S
1.Indicators
Display errors and the machine status. See "Control Panel", General Settings Guide.
m: Data In Indicator (indicates data is be- ing received.).
D: Add Toner indicator
L: Service Call indicator
M: Open Cover indicator
x: Misfeed indicator
2.{User Tools/Counter} key
Use to change default or operation pa- rameters according to the operating con- ditions.
3.Display panel
Displays the operation status and messages.
Note
❒Screenshots in this manual are exam- ples and may differ from actual screens.
4.{Check Modes} key
Press to check the destinations which are currently selected.
5.{Program} key
6.{Clear Modes} key
Press to clear the current settings.
7.{Energy Saver} key
Press this key to begin
Note
❒This key is inactive while scanning or setting scanner defaults.
8.{Interrupt} key
Press this key to interrupt the scanner mode and to activate the copy mode.
9.Main power indicator and power indicator
The main power indicator lights up when the main power switch is set to on. The power indicator lights up when the ma- chine is on.
Important
❒Do not turn off the main power while the power indicator is lit or blinking. Doing so may cause a failure of the hard disk.
Use to register settings used frequently as a program or to recall the registered pro- gram.
3