
Initial Scanner Setup
Depending on how the original is positioned, the scan area will be as follows:
AGG002D |
The range of possible original sizes and scan sizes is as fol- lows:
•Original Size
X1:
Y1:
9 • Scan Area
X3:
Y3:
Keep the scan area settings within these ranges.
D When all dimensions are en- tered, press [OK].
E Make sure that the area speci- fied in step D (X3 and Y3) is shown in the [Custom Size] field, and then press [OK].
Automatically Detecting the Vertical Measurement (Length)
APress [Auto Detect].
B Using the number keys, enter the horizontal measurement (width) of the original.
Select [X1], enter the horizontal measurement, and then press the {#} key.
When you automatically detect the vertical measurement (length) you can specify only [X1]. [X2] is set to “0”, and [X3] is set to the same value as [X1].