Getting Started

Installing Software

This section describes how to install

1 the software supplied on the “Scan- ner Driver and Utilities".

Reference

For details about the software on the CD-ROM and the system re- quirements of the software, see p.110 “Software Supplied on CD- ROM”.

If [Cancel] is selected during instal- lation, the installation will be stopped and all the remaining soft- ware will not be installed. If [Can- cel] has been selected, reinstall the remaining software after restarting the client computer.

For information about the software that can be installed by Auto Run, see p.110 “Software Supplied on CD-ROM”.

Quick Install

When the CD-ROM is inserted into a client computer running Windows 95/98/Me/2000/XP, Windows Serv- er 2003, or Windows NT 4.0, the in- staller starts automatically (Auto Run) to install various software.

Note

If Plug and Play starts, click [Can- cel] in the [New Hardware Found], [Device Driver Wizard], or [Found New Hardware Wizard] dialog box, and then insert the CD-ROM. The [New Hardware Found], [Device Driver Wiz- ard], or [Found New Hardware Wizard] dialog box appears depending on the operating system used.

Auto Run may not automatically work with certain operating sys- tem settings. If this happens, launch “SETUP.exe” on the CD- ROM root directory.

To disable Auto Run, press the {SHIFT} key when inserting the CD-ROM into the drive and keep it pressed until the computer finish- es reading from the CD-ROM.

Limitation

For installation under Windows 2000/XP, Windows Server 2003, or Windows NT 4.0, log on as an Ad- ministrators group member.

TWAIN Driver

To use the machine as a network TWAIN scanner, it is essential to in- stall the TWAIN Driver on a client computer.

If an application that supports TWAIN is not installed on the client computer, it is also necessary to in- stall DeskTopBinder. For information about the installation of DeskTop- Binder, see p.11 “DeskTopBinder”.

Preparation

Before installation, check the sys- tem requirements for the TWAIN Driver. For details about the sys- tem requirements, see p.110 “Soft- ware Supplied on CD-ROM”.

Note

Use Auto Run for installation.

10

Page 18
Image 18
Ricoh Type 480 appendix Installing Software, Quick Install, Twain Driver