![](/images/new-backgrounds/1126908/12690891x1.webp)
Sending Scan Files by Scan to Folder
![](/images/new-backgrounds/1126908/12690891xi2.webp)
Reference
For details about the maxi- mum number of characters that can be entered, see p.113 “Scan to Folder”.
KPress [OK].
LIf entering a password to log on is required, press [Manual In- put] for [Password].
3 | The soft keyboard appears. | |
M Enter the password. | ||
|
NPress [OK].
OTo change the port number which is set in [System Settings], press [Change] on the right side of the port number field. Enter a port number using the number keys, and then press the {#}key.
PPress [Connection Test].
A connection test is performed to check whether the specified shared folder exists.
Note
❒The connection test may take time.
❒You may not be able to press
[Connection Test] right after pressing [Cancel] during a connection test.
Q Check the connection test re- sult, and then press [Exit].
RPress [OK].
STo enter more destinations, re- peat steps A to R.
Note
❒To deselect a destination, press [UPrev.] or [TNext] to display the destination in the desti- nation field, and then press the {Clear/Stop} key.
❒To change the path for the folder that has been entered, press [Change] on the left side of the destination field. Enter the correct path for the fold- er, and then press [OK].
❒To check the selected desti- nations, press the {Check Modes} key.
Searching for a destination folder in client computers on the network
APress [Enter Destination].
BPress [SMB].
C Press [Browse Network] on the right side of the path field.
The list of client computers on the same network appears.
38