Configuring/Registering Scan Settings
❖Scan Size
Select the size of the original to be scanned.
When [Auto Detect] is selected, the auto detect function of the machine is used to set the origi- nal size.
If you select [Custom Size], you can specify the vertical and hor- izontal dimensions of the scanned area in millimeters. Al- ternatively, specify the horizon- tal dimension only, and then set the vertical dimension using
[Auto Detect].
Reference
For details about operations under [Custom Size], see p.99 “Selecting a custom size”.
When the size is specified, scan- ning is performed for that size, regardless of the actual size of the original. The following sizes
7 can be selected:
A0R, A1RS, A2RS,
A3RS, A4RS,B1R,
B2RS,B3RS,B4RS,
36⋅ 48 inchR,
34⋅ 44 inchR,
30⋅ 42 inchR,
24⋅ 36 inchRS,
22⋅ 34 inchRS,
18⋅ 24 inchRS,
17⋅ 22 inchRS,
12⋅ 18 inchRS,
11⋅ 17 inchRS,
81/2 ⋅ 14 inchRS,
9 ⋅ 12 inchRS,
81/2 ⋅ 11 inchRS
❖Edit
Make editing settings.
•Erase Border
Delete the borders of the scanned original according to the width specified.
If you select [Same Width], you can specify, millimeters (inches), a uniform width for deleting all sides (top, bot- tom, left, and right). If you select [Diff. Width], you can specify, millimeters (inches), a different width for deleting each side. You can specify a value between 2 and 99 mil- limeters (0.1 and 3.9 inches).
Limitation
❒If you set [Scan Size] to [Au- to Detect], or select [Auto Detect] for the vertical length in [Custom Size], [Erase Border] becomes un- available (If [Erase Border] was selected beforehand, [Erase Border] is disabled).
•Positive / Negative
If you select [Positive / Nega- tive], a black and white origi- nal will produce a negative scanned image.
Note
❒If you select [Erase Border], the deleted margin is made black.
•Mirror Image
If you select [Mirror Image], the scanned image will be a mir- ror image of the original.
C Press [OK].
74
