Technical Data
Technical Data
ProMix 2KE
|
| US |
| Metric |
Maximum fluid working pressure | See Models, pages 3 and 4. |
| ||
|
|
|
| |
Maximum working air pressure | 100 psi |
| 0.7 MPa, 7 bar | |
|
|
|
| |
Air supply | 75 to 100 psi |
| 0.5 to 0.7 MPa, 5.2 to 7 bar | |
|
|
|
|
|
Air filter inlet size |
|
| 3/8 npt(f) | |
Air filtration for air logic |
| 5 micron (minimum) filtration required; clean and dry air | ||
|
|
| ||
Air filtration for atomizing air |
| 30 micron (minimum) filtration required; clean and dry air | ||
|
|
|
| |
Mixing ratio range |
|
| 0.1:1 to 30:1 | |
|
|
|
| |
Viscosity range of fluid |
|
| 20 to 5000 cps | |
|
|
|
| |
Fluid filtration |
|
| 100 mesh minimum | |
|
|
|
| |
Fluid outlet size (static mixer) |
|
| 1/4 npt(f) | |
|
|
| ||
External power supply requirements |
| 85 - 250 Vac, 50/60 Hz, 2 amps maximum draw | ||
|
| 15 amp maximum circuit breaker required | ||
|
| 8 to 14 AWG power supply wire gauge | ||
|
|
|
| |
Operating temperature range | 41° to 122°F |
| 5° to 50°C | |
|
|
|
| |
Approximate weight | 300 lb |
| 136 kg | |
|
|
|
| |
Environmental conditions rating |
| indoor use, pollution degree (2), installation category II | ||
|
|
|
| |
Fluids handled |
|
| one or two component: | |
| • solvent and waterborne paints | |||
| • | polyurethanes | ||
| • | epoxies |
|
|
| • | acid catalyzed varnishes | ||
| • | moisture sensitive isocyanates | ||
|
|
|
|
|
|
|
|
|
|
1:1 to 10:1 Mixing Ratio |
|
| ± 2% | |
|
|
|
| |
10.1:1 to 30:1 Mixing Ratio |
|
| ± 5% | |
|
|
|
|
|
Noise level |
|
|
|
|
Sound pressure level |
|
| below 70 dBA | |
Sound power level |
|
| Below 85 dBA | |
Materials of construction |
|
|
|
|
Wetted materials on all models |
| 303, 304 SST; Tungsten carbide (with nickel binder); | ||
|
|
| perfluoroelastomer; PTFE | |
3A0868G | 73 |
