Basic Operation
8.Purge as follows:
•Purge component A side. Press the manual override on the Dose Valve A solenoid valve and trigger the gun into a grounded metal pail.
•Purge component B side. Press the manual override on the Dose Valve B solenoid valve and trigger the gun into a grounded metal pail until clean solvent flows from the gun.
9.Reinstall the Control Box cover.
10.Shut off the solvent fluid supply.
11.Disconnect the solvent supply lines and reconnect the component A and B fluid supplies.
NOTE: The system remains full of solvent.
•Repeat to thoroughly clean the mix manifold.
Manual overrides
Solvent Valve A
Solenoid
Dose Valve A | Gun Flush Box Solenoid | ti15730a | |
Solenoid | |||
location, if used. |
| ||
|
| ||
Solvent Valve B | Dose Valve B |
| |
Solenoid | Solenoid |
|
FIG. 19. Solenoid Valves in Control Box
34 | 3A0868G |
