To Attach the Pouring Shield
1. Make sure Setting Control is set to O and Mixer is unplugged.
2. Press up on Mixer Release Button and tilt Mixer Head up.
3. Attach Bowl and desired Mixer attachment. See page 7 for more information.
4. Slide the narrow section of Pouring Shield under Mixer attachment. See Illustration 1.
5. Place Pouring Shield on bowl.
See Illustrations 2 and 3.
6. Align the narrow section of collar on Pouring Shield with indent on beater shaft. See Illustration 4.
7. Press up on Mixer Release Button and tilt Mixer Head down.
8. Turn opening of Pouring Shield to desired position.
9. Insert Pouring Shield tabs in slots on collar. See Illustration 5.
10. To remove the Pouring Shield, reverse the order of directions.
8
