Honeywell K5305-1V5 Installation and Setup Guide, Model, Product, Input Type, Description

Installation and Setup Guide

Compatible 5800 Series Transmitters Table (continued)

Model	Product	Input Type	Description
5817	Multi-Point Universal	RF	Has three unique input (loop) codes: one for a “Primary” contact
	Transmitter		loop with programmable options; the others for two “auxiliary”
			closed circuit contact loops.
5818	Recessed Transmitter	RF	• Reed switch magnetic contact sensor; easily hidden in the frame
			and edge of a door or window.
			• Has a single unique input (loop) code.
5819	Shock Processor	RF	• Connects to externally mounted inertia-type shock detector (not
	Transmitter		supplied).
			• Has built-in tampered cover switch.
			• Has 3 unique input (loop) codes:
			Loop 1: Terminals for a wired, N.C. sensor loop.
			Loop 2: For a closed circuit contact loop using the built-in reed
			switch in conjunction with a magnet.
			Loop 3: Terminals for a wired, closed circuit contact loop.
5819WHS	Shock Processor	RF	• Has built-in shock sensor.
5819BRS	Transmitter		• Has built-in tampered cover switch.
			• Has 3 unique input (loop) codes:
			Loop 1: Built-in shock sensor loop wired to TB1 (normally closed).
			Loop 2: For a closed circuit contact loop using the built-in reed
			switch in conjunction with a magnet.
			Loop 3: Externally wired, closed circuit loop connected to TB2.
5827	Wireless Keypad	Uses House	• Can be used to turn the burglary protection on and off.
		ID only	• Features the same built-in panic functions as wired keypads.
			• The keypad is identified as zone “00” on wired keypads when it
			transmits with a low battery.
5827BD	Wireless Two-Way	Uses House	• Requires 5800TM Transmitter Module.
	Keypad	ID only	• Operates the system similarly to wired keypads, including panics.
			• Can indicate system status via its 3 LEDs and sounder.
			• Includes 3 panic keys.
5849	Glassbreak Detector	RF	• House ID must also be set.
			• Requires both sound and shock of breaking glass to cause alarm
			to be transmitted.
5890	PR Detector	RF	Dual-element passive infrared detector/transmitter with built-in
			selectable pulse count.
			Note: There is a 3-minute lockout between fault transmissions to
			conserve battery life.
5899	Magnets		Package of 4 magnets for use with 5816 and 5817 transmitters.

8-4