Honeywell K5305-1V5 setup guide Setting the Real-Time Clock, Keys Displayed as Zone ∗ /1 ∗ /#

Installation and Setup Guide

SUMMARY OF ARMING MODES

Arming Mode		Features for Each Arming Mode
	Exit Delay	Entry Delay	Perimeter Armed	Interior Armed
AWAY	Yes	Yes	Yes	Yes
STAY	Yes	Yes	Yes	No
NIGHT-STAY	Yes	Yes	Yes	only those zones
				listed in Night-
				Stay zone list
INSTANT	Yes	No	Yes	No
MAXIMUM	Yes	No	Yes	Yes

Panic Keys

There are three Panic keys (A, B, and C) that, if programmed, can be used to manually initiate alarms and send a report to the central station.

Each key can be programmed for 24-hour Silent, 24-hour Audible, Fire, or Personal Emergency responses. The programmed Panic response is activated when the appropriate key is pressed for at least 2 seconds.

The Panic keys are identified by the system as follows:

Keys	Displayed as Zone
[A] (∗/1)	95
[B] (∗/#)	99
[C] (3/#)	96

IMPORTANT: For a Silent panic function (if programmed) to be of practical value, you must program a report code for the zone and the system must be connected to a central station.

Setting the Real-Time Clock

Set the time and date by doing the following:

1. +[#] + [6] [3]

(Security Code)

2.Press [∗] when the time/date is displayed.

A cursor appears under the first digit of the hour. To move cursor ahead, press [∗]. To go back, press [#].

•Enter the 2-digit hour setting.

•Enter the 2-digit minute setting.

•Press [1] for PM or [2] for AM.

•Enter the last two digits of the current year.

•Enter the 2-digit month setting.

•Enter the 2-digit day setting.

3.To exit, press [∗] when cursor is at the last digit, or wait 10 seconds.

Alpha Display:

DISARMED

READY TO ARM

TIME/DATE SAT 04:04PM 10/17/00

Current time display

TIME/DATE SAT 04:04P2000/10/17

Time/date editing display

6-6