Resolving problems that generated messages
This section helps resolve problems that generated messages on the computer.
Messages for both Windows and Macintosh
This section lists some common errors that only provide a simple message but no information for resolving the error. Errors that you see in Printer Status and Alerts, the HP Color LaserJet 2500 Toolbox, or the embedded Web server provide their own instructions for resolving the error. For other errors generated by your operating system, see the documentation for the operating system or computer.
Symptom | Possible Cause | Solution |
Limit Check Error | The print job is too complex. |
You might need to reduce the complexity of the page or install more memory.
Use one of the other printer drivers.
Send the print job in smaller pieces or in fewer numbers of pages.
Messages for Windows only
MessageSolution
“Error Writing to LPTx” in Windows 95, 98, or Me.
Make sure that there is paper in the tray.
Make sure the cables are connected correctly, the printer is on, and the Ready light is on.
Ensure that the printer is not connected using both a USB and a parallel cable.
Print a Demo page from the HP Color LaserJet 2500 Toolbox to ensure that the computer can communicate with the printer.
On the Start menu, point to Settings and click Printers.
Try printing again.
“General Protection Fault”
“Exception OE”
“Spool32”
“Illegal Operation”
Restart the computer and try again.
Clear the contents of the computer Temp folder, which is generally located in C:\Windows (95, 98, and Me) or C:\Winnt (NT 4.0, 2000, XP).
Other Windows messages | See Microsoft Windows 95, 98, 2000, NT 4.0, Me, or XP documentation that came with the |
| operating system or computer for information. |
|
|
EN | Chapter 4 Problem solving and maintenance 89 |