Details Engineering

NOTE If the PORT1 icon does not appear as a folder name, you might have to enable folder viewing for FTP sites in your Web browser. In Microsoft Internet Explorer, use the following procedure to enable the folder view.

1.Select Tools, then select Internet Options, and then select the Advanced tab.

2.Select the Enable folder view for FTP sites.

3.Click OK to save the setting.

Print-ready file printing by using FTP on a direct network connection

If the HP LaserJet 5200 uses a direct network connection, use file transfer protocol (FTP) to print a print- ready file. Complete the following steps for the operating system:

1.Take note of the TCP/IP address on the Embedded Jetdirect page. The HP Embedded Jetdirect page is the second page of the Configuration page printout. To print a configuration page, see Determining the current level of firmware .

2.Open a command window on the computer.

3.Type ftp <TCP/IP printer ADDRESS>. For example, if the TCP/IP address is 192.168.0.90, type the following:

ftp 192.168.0.90

4.Press Enter on the keyboard.

5.When prompted for the user name, press Enter.

6.When prompted for the password, press Enter.

7.Type bin at the command prompt.

8.Press Enter. The message 200 Types set to I, Using binary mode to transfer files appears in the command window.

9.Type put <FILENAME>, where <FILENAME> is the name of the print-ready file to be printed, including the path. For example, type the following:

put C:\LJ\5200FW.PDF

NOTE If the file name or path includes a space, you must enclose the file name or path in quotation marks. For example, type put "c:\My Documents\LJ\5200FW.PDF"

The following series of messages appears in the command window:

200 PORT command successful

150 Opening BINARY mode data connection

226 Ready

226 Processing Job

10.Press Enter on the keyboard.

332 Chapter 7 Engineering Details

ENWW