Tip You can also send a fax in color, such as a photo, from your HP All-in- One. Just press Start Fax Color instead of Start Fax Black. You can also change the resolution or contrast of your fax. For more information see Change the fax resolution and lighter/darker settings.

Did you know that you can send a fax from your computer by using the HP Director that came with your HP Image Zone software? You can also create and attach a computer-generated cover page to send with your fax. It's easy. For more information, see the onscreen HP Image Zone Help that came with your HP Image Zone software.

Print fax confirmation reports

If you need printed confirmation that your faxes were successfully sent, follow these instructions to enable fax confirmation before sending any faxes and select either On Fax Send or Send & Receive.

The default fax confirmation setting is Off. This means that your HP All-in-One will not print a confirmation report for each fax sent or received. A confirmation message indicating whether a fax was successfully sent appears briefly on the control panel display after each transaction.

1.Press Setup.

2.Press 2, and then press 1.

This selects Print Report and then selects Fax Confirmation.

3.Press to select one of the following.

–Off: does not print a fax confirmation report when you send and receive a fax.

–On Fax Send: prints a fax confirmation report for every fax you send.

–On Fax Receive: prints a fax confirmation report for every fax you receive.

–Send & Receive: prints a fax confirmation report for every fax you send and receive.

4.Press OK.

Send two-sided originals

If you have an HP two-sided printing accessory installed, you can send two-sided originals in black and white. For information on loading paper in your accessory, read and follow the instructions that came with the accessory.

This feature is only supported for sending black-and-white faxes. It is not available if you are sending color faxes.

Tip You can also print received faxes on both sides of the page. For more information, see Set up the HP All-in-One to print single- or two-sided faxes.

1.Load your originals face up in the document feeder tray with the top of the page on the left.

Note Your originals must be loaded in the document feeder tray; sending two-sided originals is not supported when sending a fax from the glass.

2.Enter the fax number by using the keypad.

3.In the Fax area, press Menu until Two-Sided Send appears.

features fax the Use

User Guide

105