Send a scan to a memory card loaded in your HP All-in-One (network-connected)

You can send a scanned image as a JPEG image to a memory card. This section describes the process when your HP All-in-One is connected to a network.

1.Load the original face down on the right front corner of the glass.

2.In the Scan area, press Scan To until Memory Card displays on the control panel display.

3.Press OK.

The HP All-in-One scans the image and saves the file to the memory card in the JPEG format.

Stop scanning

➔To stop scanning, press Cancel on the control panel, or in the HP Image Zone software, click Cancel.

features scan the Use

User Guide

71