Chapter 7

Make sure you have paper loaded in the input tray.

2.Load your original face down on the right front corner of the glass or face up in the document feeder tray.

If you use the document feeder tray, place the page so that the top of the document is inserted first.

3.In the Copy area, press Menu and make any needed changes to the copy settings.

4.In the Copy area, press Menu until Set New Defaults appears.

5.Press to select Yes.

6.Press OK to accept the settings as the new default settings.

7.Press Start Copy Black or Start Copy Color.

The settings you specify here are only saved on the HP All-in-One. They do not adjust the settings in the software. You can save your most frequently used settings by using the HP Image Zone software that came with your HP All-in-One. For more information, see the onscreen HP Image Zone Help.

Stop copying

➔To stop copying, press Cancel on the control panel.

Use the copy features

66

HP Officejet 7200 All-in-One series