![](/images/backgrounds/292262/hp-officejet-7200-users-manual-545247143x1.png)
Set up your network
Chapter 13
Advanced network settings
The advanced network settings are provided for your convenience. However, unless you are an advanced user, you should not change any of these settings. The advanced settings include Set Link Speed and IP Settings
This section contains the following topics:
Set link speed
You can change the speed at which data is transmitted over the network. The default is Automatic.
To set the link speed
1.Press Setup.
2.Press 8, and then press 2.
This selects the Network Setup menu and then selects Set Link Speed.
3.Press until the link speed appears:
–Automatic
–
–
–
–
Change IP settings
The default IP setting is Automatic. However, if necessary, you can manually change the IP address, subnet mask, or the default gateway. To see the IP address and subnet mask of your HP
To change the IP settings from the control panel
1.Press Setup.
2.Press 8, and then press 3.
This selects the Network Setup menu and then selects IP Settings.
3.Press until Manual appears, and then press OK.
4.Edit the IP Address, and then press OK.
5.Edit the Subnet Mask, and then press OK.
6.Edit the Default Gateway, and then press OK.
Use the Embedded Web ServerThe best way to manage the general network settings for the HP
However, for more advanced settings you can use the Embedded Web Server (EWS), a network configuration tool you access from your web browser. The EWS enables
140 | HP Officejet 7200 |