I received a message on the control panel display to attach the control panel overlay

Solution This might mean the control panel overlay is not attached, or it is attached incorrectly. Lift the lid before you install the overlay. Make sure to align the overlay over the buttons on the top of the HP All-in-One and snap it firmly into place.

The control panel display shows the wrong language

Solution Usually, you set the language and country/region when you first set up the HP All-in-One. However, you can change these settings at any time by using the following procedure:

1.Press Setup.

2.Press 7, and then press 1.

This selects Preferences, and then selects Set Language & Country/Region. A list of languages appears. You can scroll through the list of languages by pressing the .

information Troubleshooting

User Guide

171