Chapter 2

Scan two-sided documents from the ADF

1.Load your originals. See Load originals in the ADF on page 11.

2.Use the Duplex switch on the ADF to select two-sided originals.

3.Open HP Solution Center, and then click Scan Document. The HP Scanning dialog box is displayed.

4.Click Scan.

5.When you are finished scanning, click Done.

The software sends the scanned file to the specified location.

Note If you are acquiring your scan from an imaging software program using TWAIN, the HP Scanjet 8270 Document Flatbed Scanner Document ISIS/ TWAIN software offers additional capabilities for brightness and contrast, and improved performance and control for two-sided scanning. For more information about installing the HP Scanjet 8270 Document Flatbed Scanner Document ISIS/TWAIN software, see Scanner setup on page 4.

Make copies from the ADF

You can use the Copy button () to scan multiple originals from the ADF and send them to a printer. For more information, see Make copies on page 9.

12

HP Scanjet 8270 Document Flatbed Scanner