HP 8270 manual Cancel a scan in progress, Change scan settings, Use the Power Save button

Chapter 1

Cancel a scan in progress

To cancel a scan during processing, or to cancel a series of scans when the ADF is being used, either:

●Use the Cancel button ().

●Click the Cancel button on the progress dialog box that is displayed during the scan.

Change scan settings

You can change settings for the scanner buttons by pressing the Button Settings button ().

1.Press the Button Settings button.

The Front Panel Scan Button Settings dialog box is displayed.

2.Click the appropriate tab, and change the settings.

3.When finished with the changes, click OK.

You can change many scan settings from the Settings menu in the HP Solution Center, including:

●Button settings for the scanner front panel

●Settings for HP Solution Center scan buttons

●Scan preferences, such as automatic exposure

Use the Power Save button

Press the Power Save button () once briefly to turn off the lamp when not using the scanner. When you are ready to begin scanning again, just press one of the front panel scan buttons to turn the lamp back on and begin scanning immediately.

To turn the scanner completely off, press and hold the Power Save button () for two

(2) seconds.

To begin scanning again once you have turned the scanner completely off, press the Power Save button once only.

10 HP Scanjet 8270 Document Flatbed Scanner