![](/images/backgrounds/286887/hp-hp-9250c-users-manual-548875117x1.png)
6.Unclip two wire clips (callout 7), remove seven screws (callout 8), and disconnect one connector (callout 9).
7
89
Figure
7.Remove the power supply.
NOTE: When reinstalling the power supply, make sure that the
ENWW | Internal components 101 |
6.Unclip two wire clips (callout 7), remove seven screws (callout 8), and disconnect one connector (callout 9).
7
89
Figure
7.Remove the power supply.
NOTE: When reinstalling the power supply, make sure that the
ENWW | Internal components 101 |