Power-switch assembly

1.Remove the following items:

●Flatbed-unit assembly. See Flatbed scanner assembly on page 96.

●Lower flatbed ribbon guide. See Power supply on page 99 (Step 4).

●Right keyboard tray guide. See Power supply on page 99 (Step 7).

2.Remove three screws (callout 1).

1

Figure 5-92Removing the power-switch assembly

3.Remove the power-switch assembly.

NOTE: When reinstalling the power switch, make sure that the power-switch mechanism is seated correctly and that the keyboard tray is seated into its guide before installing the keyboard tray guide.

ENWW

Internal components 105