Table
Control panel message | Description | Recommended action |
and then on again as you install each device.
10. Replace the component that caused the error message.
51.XY ERROR To continue turn off then | A temporary error has occurred. | 1. | Turn the device off, and then turn the |
on |
|
| device on. |
|
| 2. | If the message persists, replace the |
|
|
| formatter. |
52.XY ERROR To continue turn off then A temporary error has occurred. on
1.Turn the device off, and then turn the device on.
2.If the message persists, replace the formatter.
54.XX ERROR To continue turn off then A temporary error has occurred. on
1.Turn the device off, and then turn the device on.
2.If the message persists, replace the formatter.
55.XX DC CONTROLLER ERROR To | The device is not communicating with the | 1. | Turn the device off, and then turn the |
continue turn off then on | formatter. |
| device on. |
|
| 2. | Reseat the formatter. |
|
| 3. | Check to find out if an RFU is available. |
|
|
| If it is, perform the RFU. |
|
| 4. | If the error persists, replace the |
|
|
| formatter. See Formatter cage |
|
|
| |
|
|
|
|
56.XX ERROR To continue turn off then | A temporary error has occurred. | 1. | Turn the device off, and then turn the |
on |
|
| device on. |
|
| 2. | Reseat the formatter. |
|
| 3. | Check to find out if an RFU is available. |
|
|
| If it is, perform the RFU. |
|
| 4. | If the error persists, replace the |
|
|
| formatter. See Formatter cage |
|
|
| |
|
|
|
|
57.XX ERROR To continue turn off then | A temporary error has occurred. | 1. | Turn the device off, and then turn the |
on |
|
| device on. |
|
| 2. | If the error persists, check the fan |
|
|
| connectors and then make sure that the |
|
|
| fan blades can move freely. |
|
| 3. | Listen for the fans to operate while the |
|
|
| device is initializing. If the fan does not |
|
|
| operate during the initialization |
|
|
| sequence, replace it. |
|
|
|
|
59.XY ERROR To continue turn off then | A temporary error has occurred. | 1. | Turn the device off, and then turn the |
on |
|
| device on. |
|
| 2. | If the message persists, replace the |
|
|
| formatter. |
|
|
|
|
ENWW |