●Device Information page - Use this page to change the device name, asset number, and company contact information.

●Language page - Use this page to specify the language that the EWS Web pages use.

●Date and Time page - Use this page to set the correct date and time for the device.

●Wake Time page - The Wake Time can be set to wake the product up at a certain time on a daily basis. You can have only one wakeup setting per day; however, each day can have a different wakeup time. The sleep mode delay can also be set on this page.

Digital sending pages

You do not have access to any of the configuration settings on the Digital Sending tab of the EWS if the digital sender is using the HP DSS service. The pages on the Digital Sending tab control the configuration of the digital sending features. Because the digital sender uses the HP DSS service to carry out its digital sending tasks, it must be configured by using the HP MFP DSS Configuration Utility. This centralizes the configuration tasks and helps control security.

Networking pages

The pages on the Networking tab of the EWS provide information about the digital sender HP Jetdirect Inside embedded network connection and contain tools that you can use to configure some specific network settings.

HP Web Jetadmin software

HP Web Jetadmin is a server-based online tool that system administrators can use to configure all of the ERS and digital senders on their network. If you have a number of HP digital senders and printers, this is a useful tool for controlling and configuring them as a group rather than one by one. For supported host systems and available languages, and to download the software, go to http://www.hp.com/go/ webjetadmin.

ENWW

Troubleshooting tools 145