5.Remove one flat ribbon cable (callout 6), disconnect three connectors (callout 7), and remove one grounding screw and wire (callout 8).
7
8
6
Figure
6.Lift the flatbed scanner assembly off of the base.
98 Chapter 5 Removal and replacement | ENWW |
5.Remove one flat ribbon cable (callout 6), disconnect three connectors (callout 7), and remove one grounding screw and wire (callout 8).
7
8
6
Figure
6.Lift the flatbed scanner assembly off of the base.
98 Chapter 5 Removal and replacement | ENWW |