splitter, or a parallel splitter which has two RJ-11 ports on the front and a plug on the back.)

Example of a parallel splitter

If your computer has two phone ports, set up the HP All-in-One as described below.

Back view of the HP All-in-One

1

Telephone wall jack

2

"IN" phone port on your computer

3

"OUT" phone port on your computer

4

Telephone (optional)

5

Answering machine

6

Computer with modem

7

Use the phone cord supplied in the box with the HP All-in-One to connect to the "1-LINE"

 

port

To set up the HP All-in-One on the same phone line as a computer with two phone ports

1.Remove the white plug from the port labeled 2-EXT on the back of the HP All-in- One.

2.Find the phone cord that connects from the back of your computer (your computer dial-up modem) to a telephone wall jack. Disconnect the cord from the telephone wall jack and plug it into the port labeled 2-EXT on the back of the HP All-in-One.

Fax setup

Basics Guide

51

Page 54
Image 54
HP C6180, C6150 manual Example of a parallel splitter