6.Press or to highlight a paper size, and then press OK. The following options are available:

Print one 10 x 15 cm (4 x 6 inch) borderless photo on each sheet of 10 x 15 cm (4 x 6 inch) photo paper

Print up to three 10 x 15 cm (4 x 6 inch) photos with borders on a full-size sheet of paper

When you press OK, the selected photo reappears.

7.(Optional) Change print settings or select additional photos to print.

To print more than one copy of the selected photo

a.Press OK to display the selection menu.

b.Press to highlight Copies, and then press OK.

c.Press or to increase or decrease the number of copies, and then press OK.

To edit the selected photo before printing

a.Press OK to display the selection menu.

b.Press to highlight Edit Photo, and then press OK.

To select additional photos for printing

a.Press or to scroll through the photos on your memory card or storage device.

b.When the photo you want to print appears, press OK.

c.Press OK to select Select to Print.

d.Repeat these steps for each photo you want to print.

8.When you are done changing print settings and selecting photos, press OK to display the selection menu.

9.Press to highlight Done Selecting, and then press OK. The Print Summary screen appears.

10.Press or to highlight one of the following options, and then press OK.

Print Options

Enables you to manually specify the type of paper on which you

 

are printing and whether you want to print a date and time

 

stamp on your photo.

 

By default, the Paper Type is set to Automatic and the Date

 

Stamp setting is set to Off. If you want, you can change the

 

defaults of these settings with the Set New Defaults option.

 

 

Print Preview

Displays a preview of what your printed page will look like. This

 

enables you to verify your settings before printing and wasting

 

paper and ink on potential mistakes.

 

 

Print Now

Prints your photos with the size and layout you selected.

 

 

Print from a software application

Most print settings are automatically handled by the software application. You need to change the settings manually only when you change print quality, print on specific types of paper or transparency film, or use special features.

Use the HP All-in-One features

Basics Guide

65

Page 68
Image 68
HP C6180, C6150 manual Print from a software application, To print more than one copy of the selected photo