HP C6180 Scan an original to a memory card or storage device, Print Options, Defaults option

c.When the Fix Faded Original? prompt appears, highlight Yes or No as appropriate, and then press OK.

The HP All-in-One scans your original and shows a preview of the photo on the display.

d.Press OK to display the selection menu.

Tip If you want to print more than one copy of the selected photo, press to highlight Copies, and then press OK. Use the arrows to increase or decrease the number of copies.

If you want to edit the photo before printing, press to highlight Edit Photo, and then press OK.

e.Press to highlight Done, and then press OK. The Print Summary screen appears.

f.Press or to highlight one of the following options, and then press OK.

Print Options	Enables you to manually specify the type of paper on which
	you are printing and whether you want to print a date and
	time stamp on your photo.
	By default, the Paper Type is set to Automatic and the
	Date Stamp setting is set to Off. If you want, you can
	change the defaults of these settings with the Set New
	Defaults option.
Print Preview	Displays a preview of what your printed page will look like.
	This enables you to verify your settings before printing and
	wasting paper and ink on potential mistakes.
Print Now	Prints your photo with the size and layout you selected.

Scan an original to a memory card or storage device

You can send the scanned image as a JPEG image to the memory card that is currently inserted or a storage device that is currently attached to the front USB port. This enables you to use the photo print options to print borderless prints and album pages from the scanned image.

Note If the HP All-in-One is connected to a network, you can access the scanned image only if the card or device is being shared across the network.

To save a scan to a memory card or storage device

1.Make sure your memory card is inserted into the appropriate slot on the HP All-in- One, or a storage device is connected to the front USB port.

2.Load your original print side down in the right front corner of the glass.

3.Press the Scan Menu button.

4.Press to highlight Scan to Memory Card, and then press OK.

The HP All-in-One scans the image and saves the file to the memory card or storage device in the JPEG format.

Use the HP All-in-One features

Basics Guide 63