HP LN17 manual Kug-ch06 Page 18 Thursday, March 6, 1997 448 PM, Ten seconds, For you

kug-ch06 Page 18 Thursday, March 6, 1997 4:48 PM

C o n t r o l P a n e l M e s s a g e s

Table 6.2 Control Panel messages (continued)

Message	Description/Corrective Action
Out of Memory	Current PCL job cannot print because it exceeds available memory.
	• Even though Auto Continue may be On, you will see the message below for
	ten seconds:
	Press *
	• The printer waits ten seconds, then resumes (in effect, pressing Enter	for
	you).
	The page is ejected from the printer. Depending on the cause of the problem, your
	print job may continue or be ended.
	ACTION: • Reduce resolution to 600 x 600 dpi.
	• Install additional memory.
	• Contact your dealer or Digital.

Page Too Complex In PCL or PostScript, the printing on a page is broken into horizontal bands. When the Page Protection option is set to Off, as a page is processed, each band has a limited time to be composed and imprinted on the page. Page Too Complex means the current page cannot print because there is not enough time to compose it.

	ACTION:	Press Enter		. The page will be ejected and the print job will
		continue. The page that was too complex may be printed on more
		than one sheet of paper. To achieve correct printing, set the Page
		Protection option to the appropriate page size (or to On for
		PostScript) and send the print job again.
		Even though Auto Continue may be On, you will see the message
		below for ten seconds:
		Press *
		The printer waits ten seconds, then resumes (in effect, pressing
		Enter	for you).
Paper Jam-	Paper has jammed at the EP (print) cartridge. The message alternates with:
Open Front Cover	Remove PrintCart
	Clear Paper Path
	ACTION:	See “Print Cartridge Jam” (page 6-31).

Table 6.2 Page 13 of 19

6-18❖ L N 1 7 a n d L N 1 7 p s P r i n t e r s U s e r G u i d e