HP LN17 Kug-ch02 Page 17 Thursday, March 6, 1997 445 PM, PCL Paper Source Source Mapping Setting

kug-ch02 Page 17 Thursday, March 6, 1997 4:45 PM

A u t o m a t i c T r a y S w i t c h i n g

Example: Main Tray-Front Tray

Table 2.6 below shows how to set the Source Mapping settings so that the printer pulls paper first from the main tray and then from the front tray.

Regardless of the source you choose from your application, the printer will always pull paper first from the main tray. When the main tray is empty, the printer will pull paper from the front tray.

Table 2.6 Source Mapping settings for tray switching between the main and front trays

PCL Paper Source	Source Mapping Setting
Upper	Main-Front Tray
Manual	Main-Front Tray†
Manual Envelope	Main-Front Tray
Lower	Main-Front Tray
Large Capacity	Main-Front Tray
Envelope Feeder	Main-Front Tray

† Set this to Front if you want to print special paper through the front tray.

C h a p t e r 2 : P a p e r H a n d l i n g ❖ 2-17