HP LN17 manual Kug-appc Page 6 Thursday, March 6, 1997 451 PM

kug-appc Page 6 Thursday, March 6, 1997 4:51 PM
M e m o r y S I M M s
4 Select an appropriate SIMM slot to use.	5 Insert the new SIMM at an angle into the
Slots SIM2 (A) and SIM3 (B) are	appropriate SIMM slot and rotate it up
	into position.
interchangeable and are used for
installing additional printer memory.
6 Make sure that the clips on either side	7 Replace the controller board, sliding it
snap closed to lock the SIMM in place.	along the alignment channels. Then
	hand-tighten the thumb screws.

C-6❖ L N 1 7 a n d L N 1 7 p s P r i n t e r s U s e r G u i d e