HP LN17 manual Kug-appc Page 11 Thursday, March 6, 1997 451 PM

kug-appc Page 11 Thursday, March 6, 1997 4:51 PM

P o s t S c r i p t S I M M

4 Select an appropriate SIMM slot to use.	5 Insert the PostScript SIMM vertically into
Slots SIM0 (A) and SIM1 (B) are	the appropriate SIMM slot and rotate it
	down into position.
interchangeable and are used for
installing the PostScript SIMM.

6 Make sure that the clips on either side	7 Replace the controller board, sliding it
snap closed to lock the PostScript SIMM	along the alignment channels. Then
in place.	hand-tighten the thumb screws.

A p p e n d i x C : I n s t a l l i n g a n d R e m o v i n g P r i n t e r O p t i o n s ❖ C-11