kug-appb Page 7 Thursday, March 6, 1997 4:50 PM

8 Secure the fuser cartridge by replacing the mounting screws that were removed in Step 5 on page B-6.

If you do not need to re-install the Duplex Module, close the rear cover and skip to Step 11.

R e p l a c i n g t h e F u s e r C a r t r i d g e / B T R

9 Insert the Duplex Module through the guide channels.

10 Make sure the green side-locks at both

11 Open the front cover and remove the

ends click into position. Then close the

EP cartridge by lifting it towards the rear

rear cover.

of the printer then pulling it up and out.

A p p e n d i x B : R e p l a c i n g C o n s u m a b l e s ❖ B-7

Page 140 Page 142
Page 141
Image 141
HP LN17 manual Kug-appb Page 7 Thursday, March 6, 1997 450 PM
Page 140 Page 142
Top Page Image Contents