HP LN17 manual Source Mapping, State Saving

C o n t r o l P a n e l O p t i o n s

Table D.1 Control Panel menu options, settings, and descriptions (continued)

Menu Option,
Location(s),	Description
Setting(s)
Source Mapping	Maps the PCL paper source commands to the printer’s paper trays.
PCL Emulat Menu	Each paper source may be mapped to one of the following settings:
Options (Paper Sources):	Main Tray
Upper	Front Tray
	Main-Front Tray
Manual
	Lower 1 Tray†
Manual Envelope
	Lower 2 Tray†
Lower
	Lower 1-Main†
Large Capacity
	Lower 2-Main†
Envelope Feeder
	Lower 1-Lower 2†
	Lwr1-Lwr2-Main†
	† Appears only when one or two optional lower trays are installed.
State Saving	Reserves memory for saving permanently downloaded fonts and macros, when
PCL Emulat Menu	the printer switches from using the PCL printer language to using the PostScript
	printer language.
PostScript Menu
	• When set to Off, all “permanently” downloaded fonts and macros are
Off*
	cleared from memory when switching PDLs. They must be downloaded again
On	when the printer switches back to PCL from PostScript.
	• When set to On, “permanently” downloaded fonts and macros are stored in
	printer memory. You eliminate the time to download them again when the
	printer switches back to PCL.
	Temporary fonts and macros are always cleared at the end of every print
	job.
	State Saving requires 22 MB of memory if the PostScript option is installed. If the
	PostScript option is not installed, State Saving may be selected with 18 MB. This
	will prevent loss of downloaded PCL fonts and macros if applications change the
	setting of Resolution or Page Protection. Enabling State Saving can have an
	effect on printing speed. It is recommended that this option be enabled only with
	22 MB of printer memory.
	Table D.1 Page 14 of 16

D-16❖ L N 1 7 a n d L N 1 7 p s P r i n t e r s U s e r G u i d e