kug-appb Page 9 Thursday, March 6, 1997 4:50 PM

R e p l a c i n g t h e F u s e r C a r t r i d g e / B T R

16 Pull the tab to remove the BTR’s

17

protective covering.

 

18

Re-insert the EP cartridge into the guide channels marked by the arrows inside the top cover. Push in until it clicks in place, then close the front cover.

Plug in the power cord. Press and hold Online and Menuwhile powering ON the printer. This will reset the Fuser Life counter and release the warning message.

After warming up for a few minutes, the Control Panel displays the following message:

Online

Ready

If the Replace Fuser Cartridge message still appears, Step 18.

If any other message is displayed, see Table 6.2 starting on page 6-6.

A p p e n d i x B : R e p l a c i n g C o n s u m a b l e s ❖ B-9