HP LN17 manual Kug-ch06 Page 20 Thursday, March 6, 1997 448 PM

kug-ch06 Page 20 Thursday, March 6, 1997 4:48 PM

C o n t r o l P a n e l M e s s a g e s

Table 6.2 Control Panel messages (continued)

Message			Description/Corrective Action
Press − to Init.	Either the hard disk’s partition block cannot be understood or it has a bad high
Press ↓ to Abort	level format.
	This message flashes alternately with either:
	Unknown Disk
	or
	Disk Format Bad
	ACTION:	Press Up	to format the disk or press Down	to abort.
*Prntng Simplex*	The printer does not have enough memory to print the job as duplex, and will
	print it as simplex.
	ACTION:	None. The message clears when the next job starts.
Processing...	The printer is processing data from a computer for printing.
	ACTION:	None.
PS Font List	The list of PostScript fonts is printing.
Printing...	ACTION:	Remove the PostScript Font List from the output tray when it has
		finished printing.
Ready	The printer is online and waiting for data to print.
	ACTION:	None.
Remove DuplxUnit	A paper jam has occurred at the Duplex Module. The message alternates with the
Clear Paper Path	message:
	Paper Jam-
	Open Rear Cover
	ACTION:	See “Duplex Module Jam” (page 6-30).
Remove EnvFeeder	An Envelope Feeder jam has occurred. The message alternates with the messages:
Open Front Cover	EnvelFeeder Jam-
	Remove All Envel
	and:

Remove Jam Envel

ACTION: See “Envelope Feeder Jam” (page 6-29).

Table 6.2 Page 15 of 19

6-20❖ L N 1 7 a n d L N 1 7 p s P r i n t e r s U s e r G u i d e