Manually configure IPv4 TCP/IP parameters from the control panel

Use the control-panel Administration menus to manually set an IPv4 address, subnet mask, and default gateway.

1.At the control panel, press the Home button.

2.Open each of the following menus:

Administration

Network Settings

Jetdirect Menu

TCP/IP

IPv4 Settings

Config Method

Manual

Manual Settings

IP Address, Subnet Mask, or Default Gateway

3.Use the numeric keypad, or press the up arrow or the down arrow to increase or decrease the number for the first byte of the IP address, subnet mask, or default gateway.

4.Press the OK button to move to the next set of numbers. To move to the previous set of numbers, press the back arrow .

5.Repeat steps 3 and 4 until the IP address, subnet mask, or default gateway is complete, and then press the OK button to save the setting.

68

Chapter 5 Connect the product with Windows

ENWW

Page 86
Image 86
HP M551DN manual Administration Network Settings Jetdirect Menu, Tcp/Ip