HP M551DN manual Link speed and duplex settings, Setting Description Auto

Models: M551DN

1 276
Download 276 pages 45.08 Kb
Page 88
Image 88

Link speed and duplex settings

The link speed and communication mode of the print server must match the network. For most situations, leave the product in Auto mode. Incorrect changes to the link speed and duplex settings might prevent the product from communicating with other network devices. If you need to make changes, use the product control panel.

NOTE: Making changes to these settings causes the product to turn off and then on. Make changes only when the product is idle.

1.At the control panel, press the Home button.

2.Open each of the following menus:

Administration

Network Settings

Jetdirect Menu

Link Speed

3.Select one of the following options.

Setting

Description

 

 

Auto

The print server automatically configures itself for the highest link speed and

 

 

communication mode allowed on the network.

 

 

 

10T

Half

10 megabytes per second (Mbps), half-duplex operation

 

 

 

10T

Full

10 Mbps, full-duplex operation

 

 

 

100TX Half

100

Mbps, half-duplex operation

 

 

 

100TX Full

100

Mbps, full-duplex operation

 

 

100TX Auto

Limits auto-negotiation to a maximum link speed of 100 Mbps

 

 

1000T Full

1000 Mbps, full-duplex operation

 

 

 

 

4.Press the OK button. The product turns off and then on.

70

Chapter 5 Connect the product with Windows

ENWW

Page 88
Image 88
HP M551DN manual Link speed and duplex settings, Administration Network Settings Jetdirect Menu Link Speed