HP M551DN manual Load standard-sized paper into Tray

Load standard-sized paper into Tray 3

1.Slide open the tray.

NOTE: Do not open the tray while it is in use.

2.Adjust the paper-length and paper-width guides by squeezing the adjustment latches and sliding the guides to the size of the paper being used.

3.Load paper into the tray face up. Check the paper to verify the guides lightly touch the stack, but do not bend it.

NOTE: To prevent jams, do not overfill the tray. Be sure the top of the stack is below the tray full indicator.

NOTE: If the tray is not adjusted correctly, an error message might appear during printing or the paper might jam.

86 Chapter 6 Paper and print media ENWW